BALLISTIC CONTROL MANUAL

Aim & Drag Techniques

Mechanical breakdowns engineered to bridge the gap between calibrated hardware sensitivities and flawless one-tap execution in combat.

Execution Patterns
3 CORE PROTOCOLS

A quick, direct vertical flick applied to the fire button as soon as the crosshair locks onto the chest level.

OPTIMAL RANGE5m – 20m
RECOIL SENSITIVITYLow
Execution Sequence:
  • 1Center your white crosshair near the target's upper torso before pressing fire.
  • 2Swipe the fire button vertically straight up with a quick, decisive thumb motion.
  • 3Release immediately after 3–4 bullets to prevent bullet dispersion.

Recoil Rule: If your aim flies above the opponent's head, decrease General sensitivity by 5.

GOLDEN CALIBRATION RULE5-STEP RULE
The Step-of-Five Principle
Avoid random overhaul tweaks. Calibrate with systematic steps of five points in Training Mode until locking consistency is achieved.
CALIBRATION OFFSET±5 GENERAL UNITS
OVER-AIMINGCrosshair overshoots head: Decrease General by 5
UNDER-AIMINGCrosshair stuck to chest: Increase General by 5
Recommended Training Drill

1. Lock Initial Target

Stand 15 meters from the stationary target dummy in Training Ground.

2. Perform 10 Upward Drags

Fire 10 controlled bursts without moving your feet to gauge headshot hit rate.

3. Increment or Decrement by 5

Adjust General sensitivity in single steps of 5 until 8 of 10 bullets land red.

Average Headshot Conversion Rate
+38% In 7 Days
// CALIBRATION FAQ

अक्सर पूछे जाने वाले सवाल

सेंसिटिविटी, DPI और गेम सेटिंग्स से जुड़े आपके सवालों के जवाब यहाँ पाएँ।

नहीं, DPI एक सिस्टम सेटिंग है। इसे बदलने से गेम की फाइलों में कोई बदलाव नहीं होता, इसलिए ID बैन होने का कोई खतरा नहीं है।

PATH:Settings → Developer Options → Smallest Width

क्या आपको और मदद चाहिए?

हमारी टीम आपकी सेटिंग्स को बेहतर बनाने में मदद के लिए तैयार है।